LiLSX Zeolite for rich Oxygen production

Product brand:Joseph

Place of origin:China

Product Introduction
This product belongs to crystalline silicon aluminate, it's a kind of micro-pink spherical product, a special molecular sieve/zeolite for rich-oxygen production, applicable for PSA(VPSA) device, use air as raw material,seperating for rich-oxygen

Product Name: Specialized synthetic Lithium-exchanged forms of LSX type zeolite (LiLSX zeolite) for production of rich oxygen

Product IntroductionThis product belongs to crystalline silicon aluminate, it's a kind of micro-pink spherical product, a special molecular sieve/zeolite for rich-oxygen production,applicable for PSA(VPSA) device, use air as raw material, seperating for rich-oxygen, also known as Lithium molecular sieve/zeolite. Under normal or pressurized conditions,it has the performance of preferentially adsorbing nitrogen in air. Fill this product in PSA(VPSA) device,the circulating process of adsorption and desorption is realized through the control of program-controlled valve, so as to separate the air and make rich-oxygen.

Technical CharacteristicsUsing our new developed high efficiency rich-oxygen molecular sieve/zeolite,it’s low investment, energy saving, power consumption per unit oxygen enrichment is 0.35-0.4kwh/Nm3O2

Oxygen Purity:25%-95%. The device has strong adaptability, and the output is adjustable under the rated production capacity of 25-110%. The rich-oxygen after purification treatment can fully meet medical-use oxygen standard. It has the advantage of short process, high oxygen yield, highly automation, convenient for switch on&off, initiating time less than half an hour.

Applications:Widely used in metallurgy, chemical industry, oxygen welding and cutting, medical and sewage treatment.

Technical Specification(TDS)

Analyst Item

Type No.

JZOX100

JZOX101

JZOX102

Specification

Φ0.80mm~1.20mm

Φ1.30mm~1.70mm

Φ1.40mm~2.40mm

Static Adsorption Capacity (1 atm, 25℃)

Nitrogen, ml/g

≥23.0

≥23.0

≥23.0

Oxygen, ml/g

Report

Report

Report

Nitrogen: Oxygen

≥6.2

≥6.2

≥6.2

Crush Strength

Mean strength, N/particle

≥3.0

≥15

≥25

Coefficient of Variation

≤0.40

≤0.40

≤0.40

Abrasion rate (%)

≤0.50

≤0.50

≤0.50

Bulk Density (tapped) kg/m3

610~630

610~630

610~630

Residual Water(575℃1hr) wt%

≤0.5

≤0.5

≤0.5

Particle Size Distribution %

≥95

≥95

≥95

Note: the particle size can be customized per your requirements!

Packaging :Galvanized steel drum with inner plastic bag, vacuum sealed packing, 125Kg/ drum.

Transportation: non-dangerous goods, but to avoid moisture during transportation, keep dry&sealed.

Storage: store in dry and ventilated place, not in the open air.

Recommend